Thomas Dean (4 followers)
(tedean1194)
-
Multiple telemetry sensors
I am wanting to monitor the total mAh used for my turbine batteries and receiver batteries. I also want to utilize the JetiBox emulator in the Jeti transmitter to reset my MUI-30 to 0 mAh after charging.

I have my one MUI-30 sensor programmed to accumulate the mAh and not reset on power cycling, th...
See More
How People Feel About This Post
React!
Michael Kranitz
I meant a non-900 REX 3. On my Ka-32 I have a REX7 hanging off of a REX12. You could allocate an E port to a 7 and keep your 900.
1
Butch Wellmaker
Have you looked at the features of the Central Box and REX3's using EXT expanders for data? I believe it may offer a lot of what you require but in a simpler installation. To change at this point may not be in the cards but for future applications.

Just a thought.

B
1
Jeti (or other) electronic switches and mAh telemetry
Curious what others use for magnetic power switches (if any)? What do you use to monitor battery pack mAh total usage?
How People Feel About This Post
React! (1)
Michael Kranitz
I just pop a meter on my packs during the day. The packs are usually fine for 3-4 flights and I never get that many flights in! I did use the Jeti remote switch. It drains the battery listening for commands but it’s pretty cool!
1
Good Hunting
I don't really have a need for a magnetic switch but for the telemetry data I use UnisensE module. Works with most brands and I get all the data I need on my Jeti...
1
Rémy Fehlmann
Your setup should tell the possible options and their size. Tell us more!
For my Lama Vario T-Rex I got Emcotec 100/200 and three OptiPower modules: Backup + Flash Alert + Anti EMF/Power back.
Switch is convenient to connect the batteries in advance with no fiddling of the heli at public show.
3
Jeti Radios, looking for answers
I made the switch to Jeti and going thru the learning curve. No doubt I am totally impressed, a whole new world of capabilities with Jeti. The Bell and Lama are converted, waiting on some decent flying to “adjust” the Axon (read Michael and Sandy’s article along with a ton of Sandy’s help). Also, a...
See More
How People Feel About This Post
React!
-
Administrator
Loren Fedje
I think you already found it. 😊
-
Administrator
Michael Kranitz
Yup, this is it. Make a separate post but don’t select the advice checkbox. That way you can comment on answers
Large Scale Heli Transport, what is your method?
I need to upgrade my method of getting helis to the field. I am curious what most folks use to transport their large scale helis. Michael has an incredible van. Perhaps some use trailers? For me, it is looking like something that will be dedicated to helis only.

What are the pros and cons of trail...
See More
How People Feel About This Post
React!
-
Administrator
Uwe Behr
If you choose a trailer, you have to keep in mind that an empty trailer (except for the 25kg helicopter) offers no cushioning. For this reason, it is very important to dampen the helicopter itself against vibrations.
-
Administrator
Uwe Behr
This trolley is then lashed in the trailer
-
Administrator
Thomas Dean
Uwe, thanks. You confirm my thoughts, small trailers lack adequate suspension. Your individual heli dolly is ingenious.