1/4 Scale Lama - REBUILD
(Vario Swash Driver 68/50)
I am finally ready to get this bird in the air again! First, I'll phase the head. The next chapter will feature tracking the blades. Closing in!
LEAD OR FOLLOW?
During this step, I went back and forth on the swash follower/driver. People will say that the VARIO logo should be on the OUTSIDE when a...
See MoreLEAD OR FOLLOW?
During this step, I went back and forth on the swash follower/driver. People will say that the VARIO logo should be on the OUTSIDE when a...
How People Feel About This Post
Brett Maiese
I’ve had links in the past were the logo goes in. I Ive always looked at the link and determine which side needs to snap. One side you’ll be able to get both holes visible the other will only have one. You never want to force the ball-link past the small opening. It Stretches and deforms the plasti...
See MoreBrett Maiese
I’ve had problems with vario drivers and well qc in general and decided to make my own driver using Diabolo driver parts and the main hub from vario’s like yours.
Rene Gotiear
Looking good Michael!
